Collect
Gallery collector
The FUT Gallery counts every card that reaches your club, even after you sell it. The Gallery tab uses that to fill and grade sets for mostly EA’s 5% tax.
FC 27’s FUT Gallery counts a card the moment it reaches your club, and the card stays counted (and in its slot) after you sell it. So you don’t have to keep a set to fill it: each player only needs to pass through your club once. The Gallery tab in the SnipeBid panel is built around that: it opens a view that ranks every set by how good a deal it is. It needs an active license.
The Gallery itself is on your console only. EA’s Web App has no Gallery screen, so SnipeBid can buy, register and resell cards, but it can’t grade a set for you. It can read your progress from EA, though: Sync asks EA which players of a set you have collected, sold ones and ones used in SBCs included.
How Gallery sets work
- Club sets need 15 players of the club, men’s or women’s. The big clubs need 20: Arsenal, Chelsea, Atlético de Madrid, FC Barcelona and FC Bayern München.
- League sets need 30 players of the league. Women’s leagues are sets of their own.
- Rarity sets: a few, such as Heroes (5 players).
- No nation sets.
- Grades come from points. Each card in a set is worth points: higher-rated cards are worth a lot more, and special versions (TOTW and other promos) more than the gold card. A set is graded only when it’s full.
- You grade on the console. When a set is full, press Grade Set in the Gallery on your console (Regrade later, after you raised the score). SnipeBid can’t do it, so it tells you when a set is ready.
| Grade | Points | Reward |
|---|---|---|
| D | a full set | Club badge |
| C | 170,000 | Club kit |
| B | 1,200,000 | 50 Gallery Tokens |
| A | 1,800,000 | 70 Gallery Tokens |
| S | 2,800,000 | 100 Gallery Tokens |
This is the ladder of a club set as seen on the console. SnipeBid uses it for every set. Your console shows the exact one.
The Gallery view
The Gallery tab opens the view in one click. At the top it says how many sets you can finish cheaply and which one is cheapest, with a small line of stats (cards collected, net cost, cards still selling). Done takes you back to the tab you used before. Both the Gallery and the Evolutions tabs work this way.
- Home lists every set, best deal first. Each tile shows a ring with your count (for example 9 / 15), the set’s name, a verdict chip, what finishing it takes (players, the most it can spend and the ≈ result) and the reward it unlocks.
- Order: full sets (Ready to grade) first, then Flip & finish, Cheap, Fair and Pricey, and inside each the cheapest first. A set without up-to-date prices keeps its place but is greyed.
- Filters: All, Can finish (Flip & finish or Cheap), Started and Ready (full sets). Club sets are grouped like the console, with Leagues and Rarities below the list.
- Prices line at the top: Prices up to date and how old the newest price is, or Waiting for up-to-date prices (see Up-to-date prices). The ↻ button reads your club and the sets again.
- A set’s screen shows a big ring, the players still missing, the Worth it? card, your console count, Max per card, the Buy mode, the players to buy with the age of each price, and the players you own.
The grade ladder above is shown as the reward of each set. SnipeBid names the reward and never puts a coin value on Gallery Tokens.
Everything marked ≈ is an estimate. Points come from SnipeBid’s own table, built from cards seen on the console. Coins are the coins you are likely to gain or lose once the cards sell again. Your console has the real points and grade.
Is a set worth it?
Every set gets one verdict, worked out from the cards it still needs, their up-to-date prices and your coins. It is a plain rule, not a guess:
| Verdict | What it means |
|---|---|
| Ready to grade | The set is full. Press Grade Set on your console. |
| Flip & finish | In Flip mode every missing player can be bought under your max price and resold with no expected loss. You finish the set and come out ahead. |
| Cheap | Every missing player can be bought, and the expected loss is at most 3% of what the run spends: mostly EA’s 5% tax. |
| Fair | The expected loss is at most 6% of what the run spends. |
| Pricey | The expected loss is above 6%, or some players cost more than your max price. In Flip mode also when some players aren’t listed far enough under market to flip right now. |
| Needs more coins | The whole plan costs more than the coins you have. SnipeBid can still finish the players you can afford. |
| Waiting for prices | The card prices are not up to date, so nothing can start. |
The numbers are estimates (≈). The verdict tells you what you can expect, not what is guaranteed: a card can still sell for less than you hoped.
Flip or Finish
The Buy switch on a set (and in Settings) decides how much SnipeBid may pay per card. It never pays more than a card’s up-to-date market price, in either mode.
- Flip (the default) buys only well under market: at most 88% of the market price, rounded down to a price step, and always low enough to leave at least 50 coins after EA’s 5% tax. A 1,000-coin card is bought for 850 at most and resells at the market price for 100 coins of profit, so a small dip in the market doesn’t turn it into a loss.
- Finish pays up to the market price. It completes more sets, but each card costs about EA’s 5% tax when it resells.
Cards that can’t be bought on those terms (no price, price not up to date, or over Max per card) are skipped, and the set shows how many players are short.
In Flip mode a player counts only when it is listed at or under its Flip price right now. The others show can’t be flipped now, and the set can’t be finished in Flip mode: switch the Buy mode to Finish to buy them at market.
Finish a set
For a set that isn’t full. SnipeBid buys only the players the set still needs, one card per player, cheapest first, and stops as soon as the set is full.
- Open the web app, log in and open the SnipeBid panel. Open the Gallery tab and tap a set.
- Read the Worth it? card, check Max per card and the Buy mode.
- Stop the bot, then press Finish <set> · N players · up to …. The confirm shows the players, the most it can spend and the ≈ result (a profit in Flip mode, the coins lost in Finish mode). Press Start.
- The run screen lists each player with its step: searching, bought, in your club, listed. Stop is always at the top.
- When the set is full it says … is complete: press Grade Set in the Gallery on your console.
If you don’t have the coins for the whole plan, the button reads Finish what you can and buys the players you can afford. If a run ends early, the reason is shown in plain words and Try again plans again with fresh prices.
On Home, Finish the 3 cheapest sets starts one run over up to three sets that are Flip & finish or Cheap. It stops before it would spend more than their total.
Push to a grade
For a full set, Push to <grade> on the set’s screen aims at the next grade’s points. Better cards replace the lowest ones in the set, and SnipeBid picks the cards with the most points per coin lost. It plans again after every card and stops when the grade is reached, when no card within your max price raises the score, or when the Loss budget (optional) would be used up. The same rule applies: never above a card’s market price.
Before you start, the button shows how many cards it needs and the most it can spend. If the grade is out of reach within your max price and budget, it says which score it reaches instead. When the push is done, press Grade Set (or Regrade) on your console.
Up-to-date prices
SnipeBid buys for the Gallery only on prices updated in the last few hours (three at most). Each player in To buy shows how old its price is. A price that is older shows price not up to date: the player is greyed and left out of the plan.
- When the prices as a whole fall behind, Home shows Waiting for up-to-date prices, every Finish button is switched off and nothing can start.
- A run that is going stops at its next player. Players it already bought are still listed.
- There is nothing to do: prices refresh by themselves, and the Gallery picks up again. If a run stopped, Try again plans it once more.
Sync from EA
EA’s own Gallery data counts a card the moment you collect it, even after you sold it or used it in an SBC. Sync this set (on a set’s screen) and Sync all sets (on Home) read that from EA, so the count matches the game and you don’t have to type it.
- What it reads. The players of a club or league set that you collected, found with the same player search EA’s web app uses for Concept Players. It only reads: nothing is bought, sold or changed. Every page waits out EA cooldowns like the rest of SnipeBid.
- Leagues are read club by club. EA shows at most 40 players per search, so a league set is read as its clubs (a big club is split by position). A set is marked complete only when every part was read to the end. A time estimate shows before you start, and a set shows progress (club 3 of 20, searches done, time left). A stopped sync continues where it stopped, the same day.
- Exact or “at least N”. When every part was read to the end, the count is exact and says Synced … ago · 9/15 collected. When EA lists more players than one sync can read, it says At least 9 collected: the true count is that or higher. The count is never made up.
- Never while the bot runs. Sync is refused while the bot is running or a Collect & Flip run is on, and a sync that is running stops before its next page if the bot starts. Stop the bot first, then sync.
- Daily limit. At most 600 pages a day in all (a full Sync all sets takes about 200 to 300). Sync this set again on the same set waits 10 minutes, and Sync all sets skips parts read in the last 20 hours. When the limit is used up it says so; sync again tomorrow.
Sets that EA marks as collected in answers SnipeBid already loaded need no sync. If you never sync, the count falls back to what you type below.
Type in your console count
SnipeBid counts the cards it saw you own: your club, SBC storage, your transfer list and everything it bought, sold or sorted from packs. Cards you collected earlier, or that already left your club, it can’t see. On a set’s screen, fill in On your console with the count the Gallery shows for that set.
- It is optional. Empty means unknown: the plan assumes 0 and the set is never marked full.
- It is saved per set. After a run, SnipeBid adds the cards it registered to it.
Buying and reselling
- Buying: the cheapest listing, never above the card’s up-to-date market price (in Flip mode, under it) and never over Max per card. Cards without an up-to-date price are never bought.
- Spend cap: the “up to” total in the confirm is a hard cap. The run stops before it would spend more, even if prices move after you press Start. The confirm starts on Recommended: the plan’s total plus a buffer for planned players that are gone by the time the run reaches them and need a pricier stand-in (never above the market, never more than your coins over your coin floor). Tap Minimum to use only the plan’s total. If a run still stops short on its cap, the end screen says how many players are missing and offers Try again with +… for them.
- Registering: each card goes to your club and stays there for your Wait before relisting (at least 10 seconds), so the Gallery counts it.
- Reselling: the card is listed at the market price, never below what it cost. If the market falls under the price paid during the wait, the Activity log says so. A listed card sells when a buyer comes; until then it sits on your Transfer List.
- Transfer list full: buying stops before the transfer list (100 cards) runs out of room.
Press Stop whenever you like. SnipeBid stops buying, and cards it already bought are still relisted after their wait. If a safety pause blocks that, they stay in your club and the run lists them for you. Nothing is lost.
Settings
In Settings → Club tools → Gallery.
| Setting | What it does |
|---|---|
| Max price per card | The most SnipeBid pays for any one card (at least 200). Pricier cards are skipped. Also editable on a set’s screen as Max per card. Default: 5,000. |
| Buy mode | Flip or Finish (see Flip or Finish). Default: Flip. |
| Resell at % of market | The relist price as a percentage of the card’s market price. Default: 100%. Never below what the card cost. |
| Wait before relisting | How long a bought card stays in your club before it goes back on the transfer list, so the Gallery has time to count it. Default: 20 seconds. |
How costs are calculated
- ≈ lost on a set: the coins you are likely out once the cards sell again: EA’s 5% tax plus a small margin for the gap between buy and sell price. Most of the coins come back when the cards sell. In Flip mode the expected result is a profit (≈ +…).
- Up to … coins: the most the run can spend, and its hard cap.
- Net cost in the stats line: coins spent this season minus coins back from cards that already sold. It drops as the still selling cards find buyers.
An example: you buy a card for 1,000 and it sells for 1,000. You get 950 back after the 5% tax, so the card cost you 50.
Limits
- Console only. SnipeBid can’t press Grade Set. It reads your progress from EA with Sync; where that isn’t possible, type your console count to keep its numbers right.
- Up-to-date prices only. Nothing is bought on old prices (see Up-to-date prices).
- Estimates. Points, grades and coins lost are estimates from SnipeBid’s table and current prices. A card can sell below what you hoped, or take a while to sell.
- Tradeable cards only. SnipeBid can only buy tradeable cards.
- Loans don’t count. Loan cards are ignored.
SnipeBid is an independent tool and is not affiliated with, endorsed or sponsored by Electronic Arts Inc. EA SPORTS FC and Ultimate Team are trademarks of Electronic Arts Inc.